HOLYBRO X650 ARF Kit
HOLYBRO X650 Almost Ready-to-Fly (ARF) Kit – Robust UAV Platform for Custom Applications The HOLYBRO X650 Almost Ready-to-Fly (ARF) Kit is a robust and versatile drone platform for professional development, research, and integration projects. The high-quality carbon fiber frame with foldable aluminum arm mounts provides a stable yet lightweight construction. Motors, ESCs, and LEDs are already pre-installed, allowing the drone to be assembled quickly without time-consuming soldering work. The HOLYBRO X650 ARF Kit provides an ideal foundation for the custom integration of flight controllers, GPS systems, companion computers, sensors, cameras, and other payloads. Thanks to its generous mounting areas and integrated rail system, the platform can be flexibly adapted to a wide range of requirements. Quick Assembly Without Soldering The HOLYBRO X650 ARF Kit has been designed for particularly simple and time-saving assembly. The four drone arms are supplied with motors, ESCs, and LEDs already pre-installed. The components can be connected directly to the power distribution board using the integrated XT30 connectors. This eliminates the need for time-consuming soldering of the propulsion components and allows the platform to be quickly prepared for further integration and commissioning. Robust Carbon Fiber Frame The HOLYBRO X650 V2 frame features a high-quality carbon fiber construction. The 20 mm carbon fiber tube arms are stabilized by newly developed foldable aluminum arm mounts. The design combines low weight with high mechanical strength. The arms can be folded for easy transport. The reinforced landing gear is also made from carbon fiber tubes and features improved connectors for additional stability. Generous Mounting Areas The generously sized mounting areas of the HOLYBRO X650 provide ample space for additional hardware, batteries, and payloads. Cameras, sensors, and other electronic components can be installed on the upper mounting plate. The platform also features prepared mounting holes for GPS systems and commonly used companion computers such as the Raspberry Pi 4 or Jetson Nano. Flexible Rail System The integrated rail system consists of two 10 mm diameter aluminum or metal rods, each measuring 320 mm in length. It enables flexible installation of various accessories, camera mounts, gimbals, and additional payloads. This allows the HOLYBRO X650 to be quickly adapted to different applications and individual requirements. Pre-Installed Propulsion System The HOLYBRO X650 ARF Kit is supplied with four pre-installed T-Motor MN4014 KV330 motors and four Tekko32 F4 45A ESCs. Each arm is also equipped with a NeoPixel WS2812 LED. Power connections are provided via convenient XT30 connectors. Product Highlights Robust carbon fiber frame Foldable aluminum arm mounts 20 mm carbon fiber tube arms Quick and easy assembly No soldering required for installation of the pre-installed propulsion components Pre-installed motors, ESCs, and LEDs XT30 connectors for easy installation Power distribution board with XT60 and XT30 connectors Large mounting areas for additional components and payloads Prepared mounting points for GPS systems Compatible with commonly used companion computers such as Raspberry Pi 4 and Jetson Nano Integrated rail system for cameras, gimbals, and accessories Optional mount for Intel RealSense depth cameras Mounting options for Pixhawk-Jetson baseboards Package Contents – HOLYBRO X650 ARF Kit HOLYBRO X650 V2 Frame Kit 4 × T-Motor MN4014 KV330 motors with XT30 connectors 4 × Tekko32 F4 45A ESCs with XT30 connectors 4 × NeoPixel WS2812 LEDs Gemfan 1555 carbon fiber propellers, 4 pcs. Power Distribution Board (PDB) with XT60 battery connector XT30 connectors for ESCs and peripherals LED setup instructions Frame Specifications Wheelbase: 650 mm Motor Mounting: 16–25 mm mounting pattern Main Plates: Carbon fiber, 160 × 160 mm, 2 mm thick Arms: 20 mm carbon fiber tubes Arm Mounts: Foldable aluminum construction Landing Gear: Carbon fiber tubes with 16 mm and 10 mm diameters Upper Mounting/Battery Plate: 120 × 128 mm carbon fiber Platform: Mounting holes for GPS systems and companion computers Rail System: 2 × 10 mm diameter, 320 mm long each Battery Mount: 2 battery pads and securing straps Assembly: Hand tools included Flight Time and Payload With a 6S 10,000 mAh LiPo battery, the HOLYBRO X650 can achieve a hover flight time of up to 30 minutes under the specified conditions. Actual flight time depends on the battery, flight profile, weather conditions, and installed payload. Flight Time: up to 30 minutes in hover with a 6S 10,000 mAh battery and no additional payload Complete Kit Weight: approx. 2,000 g without battery Payload without Battery: up to 4.3 kg Payload with 5,200 mAh Battery (750 g): up to 3.5 kg Payload with 10,000 mAh Battery (1,200 g): up to 3.1 kg Maximum Take-Off Weight: 6,300 g at 70% throttle Recommended Battery: 6S LiPo, 5,000–12,000 mAh, XT60 Customizable UAV Platform The HOLYBRO X650 ARF Kit provides a flexible foundation for building custom UAV systems. The combination of a robust carbon fiber frame, pre-installed propulsion system, generous mounting areas, and versatile mounting options enables the integration of a wide range of components and payloads. Whether for development projects, research, sensor integration, camera systems, or custom UAV applications, the HOLYBRO X650 ARF Kit provides a solid and highly expandable platform.
HOLYBRO X650 Development Kit
HOLYBRO X650 Development Kit – Professional Development Platform for UAV Applications The HOLYBRO X650 Development Kit is a robust and versatile development platform for professional drone applications. The high-quality carbon fiber frame combines low weight with high structural strength and provides ample space for additional components, sensors, cameras, and companion computers. Depending on the configuration, the system is equipped with a HOLYBRO Pixhawk 6C or HOLYBRO Pixhawk 6X Flight Controller, HOLYBRO M10 GPS, and a plug-and-play SiK telemetry radio module. Thanks to the pre-installed motors, ESCs, and LEDs, as well as the convenient plug-in connections, the drone can be assembled quickly without any soldering. This makes the HOLYBRO X650 Development Kit suitable for developing custom UAV systems as well as for research, testing, and integration projects. Robust Carbon Fiber Frame The HOLYBRO X650 frame is made from high-quality carbon fiber and is designed to provide high structural strength while maintaining a low overall weight. The 20 mm carbon fiber tube arms are supported by robust, foldable aluminum arm mounts. This allows the drone to be folded into a compact form for transport and storage. The landing gear is also made from durable carbon fiber tubes with diameters of 16 mm and 10 mm. Reinforced connectors provide additional stability and a reliable overall construction. Quick Assembly Without Soldering The HOLYBRO X650 Development Kit has been designed for particularly simple and fast assembly. Motors, ESCs, and LEDs are already pre-installed on the arms. The arms connect directly to the power distribution board via XT30 connectors, eliminating the need for time-consuming soldering work. This makes the HOLYBRO X650 particularly suitable for developers, system integrators, and professional users who need to quickly build a ready-to-use platform for their own UAV applications. Pixhawk Flight Controller with PX4 or ArduPilot The HOLYBRO X650 Development Kit is available with either a HOLYBRO Pixhawk 6C or HOLYBRO Pixhawk 6X Flight Controller. Both flight controllers support the widely used open-source autopilot platforms PX4 and ArduPilot. The system is supplied with PX4 by default. Alternatively, ArduPilot can be installed using Mission Planner or QGroundControl. This provides a flexible foundation for a wide range of development and research projects. Large Mounting Area for Custom Extensions The generously sized mounting areas provide ample space for additional hardware. Various components, sensors, and payloads can be installed on the upper platform and battery mounting plate. The integrated rail system also allows various camera mounts, gimbals, and additional accessories to be installed. Mounting points for GPS systems and commonly used companion computers such as the Raspberry Pi 4 or Jetson Nano are already provided. Prepared for Companion Computers and Sensors Thanks to the available mounting options, the HOLYBRO X650 platform is ideally suited for integrating additional computing hardware and sensors. Companion computers can be used for autonomous flight functions, image processing, artificial intelligence, or the processing of additional sensor data. An optional dedicated mount for depth cameras is also available. This allows cameras from the Intel RealSense series or Structure Core depth cameras to be integrated. Integrated Power Distribution and Telemetry The integrated power distribution board features XT60 and XT30 connectors, providing an organized power supply for the various system components. The included SiK Telemetry Radio V3 provides a wireless telemetry link between the drone and the ground station. Technical Highlights HOLYBRO Pixhawk 6C or HOLYBRO Pixhawk 6X Flight Controller Support for PX4 and ArduPilot HOLYBRO M10 GPS module SiK Telemetry Radio V3, 433/915 MHz Robust carbon fiber frame Foldable aluminum arm mounts No soldering required for assembly Pre-installed motors, ESCs, and LEDs Large mounting areas for additional components Integrated rail system for cameras and gimbals Prepared mounting points for Raspberry Pi and Jetson Nano Optional mount available for depth cameras Package Contents HOLYBRO Pixhawk 6C with plastic enclosure and PM02 V3 or HOLYBRO Pixhawk 6X (v2A) with PM02D HOLYBRO M10 GPS module SiK Telemetry Radio V3, 433/915 MHz HOLYBRO X650 V2 Frame Kit 4 × T-Motor MN4014 KV330 motors with XT30 connectors 4 × NeoPixel WS2812 LEDs 4 × Tekko32 F4 45A ESCs with XT30 connectors Gemfan 1555 carbon fiber propellers, 4 pcs. Power distribution board with XT60 and XT30 connectors Assembly tools Technical Specifications Wheelbase: 650 mm Motor Mounting: 16–25 mm mounting pattern Frame Plates: Carbon fiber, 160 × 160 mm, 2 mm thick Arms: 20 mm carbon fiber tubes Landing Gear: 16 mm and 10 mm carbon fiber tubes Upper Mounting/Battery Plate: 120 × 128 mm Rail System: 2 × 10 mm diameter, 320 mm long each Kit Weight: approx. 2,000 g without battery Maximum Take-Off Weight: 6,300 g Recommended Battery: 6S LiPo, 5,000–12,000 mAh, XT60 Flight Time and Payload With a 6S 10,000 mAh LiPo battery, a hover flight time of up to 30 minutes is possible. Actual flight time depends on factors including battery capacity, flight profile, weather conditions, and additional payload. Flight Time: up to 30 minutes in hover Payload without Battery: up to 4.3 kg Payload with 5,200 mAh Battery (750 g): up to 3.5 kg Payload with 10,000 mAh Battery (1,200 g): up to 3.1 kg Maximum Take-Off Weight: 6.3 kg at 70% throttle Flexible Development Platform With its robust carbon fiber construction, high payload capacity, and extensive expansion options, the HOLYBRO X650 Development Kit provides a flexible foundation for professional UAV development. The generous mounting areas and support for various flight controller and companion computer platforms enable the integration of custom hardware and software. Whether for research and development, sensor integration, autonomous systems, camera platforms, or custom UAV projects, the HOLYBRO X650 provides a solid and highly expandable foundation.
HOLYBRO X650 Frame Kit
HOLYBRO X650 Frame Kit – Robust UAV Platform for Custom Applications The HOLYBRO X650 Frame Kit is a robust and versatile drone platform for professional development, research, and integration projects. The high-quality carbon fiber frame with foldable aluminum arm mounts provides a stable yet lightweight construction. The HOLYBRO X650 Frame Kit provides an ideal foundation for the custom integration of motors, ESCs, flight controllers, GPS systems, companion computers, sensors, cameras, and other payloads. Thanks to its generous mounting areas and integrated rail system, the platform can be flexibly adapted to a wide range of requirements. Robust Carbon Fiber Frame The HOLYBRO X650 V2 frame features a high-quality carbon fiber construction. The 20 mm carbon fiber tube arms are stabilized by newly developed foldable aluminum arm mounts. The design combines low weight with high mechanical strength. The arms can be folded for easy transport. The reinforced landing gear is also made from carbon fiber tubes and features improved connectors for additional stability. Generous Mounting Areas The generously sized mounting areas of the HOLYBRO X650 provide ample space for additional hardware, batteries, and payloads. Cameras, sensors, and other electronic components can be installed on the upper mounting plate. The platform also features prepared mounting holes for GPS systems and commonly used companion computers such as the Raspberry Pi 4 or Jetson Nano. Flexible Rail System The integrated rail system consists of two 10 mm diameter aluminum or metal rods, each measuring 320 mm in length. It enables flexible installation of various accessories, camera mounts, gimbals, and additional payloads. This allows the HOLYBRO X650 to be quickly adapted to different applications and individual requirements. Product Highlights Robust carbon fiber frame Foldable aluminum arm mounts 20 mm carbon fiber tube arms Quick and easy assembly Large mounting areas for additional components and payloads Prepared mounting points for GPS systems Compatible with commonly used companion computers such as Raspberry Pi 4 and Jetson Nano Integrated rail system for cameras, gimbals, and accessories Optional mount for Intel RealSense depth cameras Mounting options for Pixhawk-Jetson baseboards Package Contents – HOLYBRO X650 Frame Kit HOLYBRO X650 V2 Frame Kit Frame Specifications Wheelbase: 650 mm Motor Mounting: 16–25 mm mounting pattern Main Plates: Carbon fiber, 160 × 160 mm, 2 mm thick Arms: 20 mm carbon fiber tubes Arm Mounts: Foldable aluminum construction Landing Gear: Carbon fiber tubes with 16 mm and 10 mm diameters Upper Mounting/Battery Plate: 120 × 128 mm carbon fiber Platform: Mounting holes for GPS systems and companion computers Rail System: 2 × 10 mm diameter, 320 mm long each Battery Mount: 2 battery pads and securing straps Assembly: Hand tools included Customizable UAV Platform The HOLYBRO X650 Frame Kit provides a flexible foundation for building custom UAV systems. The combination of a robust carbon fiber frame, generous mounting areas, and versatile mounting options enables the integration of a wide range of components and payloads. Whether for development projects, research, sensor integration, camera systems, or custom UAV applications, the HOLYBRO X650 Frame Kit provides a solid and highly expandable platform.